Multi-function disk brake lathe

1.Multi-function disk brake-lathe 2.Maximum brake disc thickness:40mm 3.Adjustment knob accuracy:0.005mm 4.Weight:85kg

Multi-function disk brake-lathe simultaneously equipped with vehicle-mounted type and separated type. You can use separated type brake-lathe for the disk that is easy to detach, while vehicle-mounted type brake-lathe for the disk that is hard to detach.BL-602 is the economic and highly capable brake-lathe to meet your requirement.

Function of resurfacing disks in variable sizes. It has manholes for adjusting  intervals, if necessary. User may adjust and mount the diameter of each  different brake disks on the vehicle, enables which  more  effectiveness when resurfacing the separated disks.

Separated - Type Operation State for On-car Brake Lathe.

                                      

Standard parts for On Car Brake Disc Lathe        Standard parts for On Desk Brake Disc Lathe

TECHNICAL PARAMETER

Disc Lathe:
Maximum brake disc thickness	40mm
Adjustment knob accuracy	0.005mm
Feed rate	8.5mm/min
Electrical specifications	220V / 110V
Net weight	6.5kg

Drive Unit
Working height min / max	1 / 1.25m
Drive speed	98rpm
Electrical specifications	220V / 110V
Weight	85kg
Ambient temperature range	-5°C to 35°C
Turning accuracy	≤ 0.005mm
Brake disc rubout	≤ 0.005mm
Brake disc thickness variation	0.005 – 0.01mm
Brake disc surface roughness	Ra 1.5 – 2.0um

Multi-function disk brake lathe